ModuSec construction options - walls

Standard walls

Composite panels are 100mm thick with pre-finished 0.55mm steel skins and a Pyrofoam (Phenolic foam) core. Each panel is 1140mm wide from joint to joint – with each wall having the last panel made or cut to size to meet the overall required length. Wall height for standard walls can be up to 6m high (around 4m for high security walls).

In general we recommend a minimum of a 50mm gap from existing walls to allow for non squared or non plumbed walls. The panels can be fitted completely from inside the new room. Walls are fitted into a base channel fixed and sealed to a concrete slab or via preformed joints with base panels, then fixed together via mechanical camlocks. Corners also have preformed joints or can be cut to size on site if preferred and finished off with a steel angle and decorative coving.

Wipe clean surfaces require no further decoration or maintenance. Internal colour is generally white. For outside construction you can choose a colour from the Corus HPS200 range. Note that no additional protection is required for an outside construction. However, if required, the panels can be clad in brick, block or any other decorative cladding sheet or panel.

Conduits, cables and light loads can be fixed directly to the steel skins with self tapping screws. Cable conduits and steel reinforcement channels can be foamed inside the panels to support heavy loads if required. Otherwise we recommend the use of Unistrut, fixed down to the floor to support heavy equipment.

High security walls

Class 2:
2 layers of 3mm steel mesh foamed into the panels. Each sheet has a 'diamond' pattern that is cross laid to frustrate the use of drill bits and cutting blades.

Class 3:
Additional 20mm layer of material encased in steel skins to further frustrate the use of cutting blades. Note that Standard, Class 2 and Class 3 walls and ceilings are interchangeable and can be mixed to meet varying security levels on different facades of a room.

For more information about Security please click here.

For more information on ModuSec panel strength please click here.

"Remtech showed outstanding performance in speed, quality and flexibility in the core construction of our new 3,000 sqm Data Centre." ...more.